Your Questions, Answered
-
Verify thermostat is set to COOL/AUTO and below room temperature
Set fan to ON or AUTO
Lower thermostat to test system operation
Check and replace dirty air filter
Ensure all vents are open and unobstructed
Confirm power disconnects are on (indoor & outdoor units)
Check breakers/fuses at electrical panel
If the problem persists, contact us for service.
-
Verify thermostat is set to HEAT/AUTO and above room temperature
Set fan to ON or AUTO
Raise thermostat to test system operation
Check and replace dirty air filter
Ensure all vents are open and unobstructed
Confirm power disconnects are on (indoor & outdoor units)
Check breakers/fuses at electrical panel
If the problem persists, contact us for service.
-
Verify thermostat is set to COOL/AUTO and below room temperature
Set fan to ON or AUTO
Lower thermostat to test system operation
Check and replace dirty air filter
Ensure all vents are open and unobstructed
Confirm power disconnects are on (indoor & outdoor units)
Check breakers/fuses at electrical panel
If the problem persists, contact us for service.
-
Verify thermostat is set to HEAT/AUTO and above room temperature
Set fan to ON or AUTO
Raise thermostat to test furnace operation
Check and replace dirty air filter
Ensure all vents are open and unobstructed
Confirm furnace power switch is on
Check breaker/fuse at electrical panel
Verify gas valve is open
Check pilot light (if applicable)
If the problem persists, contact us for service.
-
Verify thermostat is set to HEAT/AUTO and above room temperature
Raise thermostat to test boiler operation
Confirm boiler power switch is on
Check breaker/fuse at electrical panel
Verify fuel supply (oil in tank or gas valve open)
Check pilot light (if applicable)
If the problem persists, contact us for service.